FRESATRICI (NON CLASSIFICATE)  ZIMMERMANN  FZ42  USATO

DESCRIZIONE:
brand Zimmermann type FZ42 year 2012 description CNC portal milling machine details Machine No. 32 milling head VH3 Control Siemens 840D PL Technical data basic machine length: 128,000 mm, width: 12,000 mm, height: 12,200 mm Weight (machine w. control cabinet) t 149 Working range longitudinal movement (X-axis): mm 12,500, vertical slide transverse movement (Y-axis): mm 5,000, vertical slide vertical movement (Z-axis): mm 3,500, column clear width: mm 6,130, cross beam clear height: mm 6,380 Feed rate max. X-axis: m/min 50, Y-axis: m/min 60, Z-axis: m/min 50 Reduced Feed rate set-up mode m/min 2 Operating mode 3 m/min 5 Acceleration max. m/s2 3 Rated power of feed motors X-axis 2x per side: kW 22, Y-axis 2x: kW 12.7, Z-axis kW 21.2 Accuracies of linear axes positioning accuracy X-axis: mm ± 0.05, Y, Z-axis: mm ± 0.02, repeat accuracy X-axis: mm ± 0.025, Y, Z-axis: mm ± 0.01 Electrical connection Operating voltage: V 400, frequency: Hz 50, rated power: kVA 210, rated current: A 305, back-up fuse (on-site): A 315, control voltage: V 24. Compressed air (class 4 according to DIN-ISO-8573-1) particle size in air max.: μm 15, particle density of solids: mg/m3 max. 8, oil concentration: mg/m3 max. 5, pressure dew point ° C max.: +3, connection bar: at least 6 Milling head VH3 B-axis Swivel angle without suction device degrees ±110 With suction device degrees +35 / -110 Swivel speed degrees/s 60 Nominal swivel torque simultaneous Nm 1,000 Holding torque clamped Nm 2,000 C-axis Slewing speed deg/s 60 Swivel angle without suction device degrees +270 / -450 With suction device degrees ± 90 Nominal swivel torque simultaneous Nm 1,000 Holding torque clamped Nm 2.000 Milling spindle Spindle power max. constant from 6,000 min-1 KW 60 Torque max. up to 5,000 min-1 Nm 95 Spindle speed, infinitely variable min-1 10,000 Reduced milling spindle speed set-up mode: min-1 2,000 Operating mode 3 min-1 5,000 Permissible vibrations max. idle mode mm/s 3 continuous operation mm/s 6 Short-term (5 s) mm/s 10 Axial tensile load max. N 750 Axial compressive load max. N 6,000 notice The machine has already been professionally dismantled. location 39120 Magdeburg Dechow-ID V80371#102